Cosio 4.9 Main download file for skyrim

GUIDE FORUM THREAD

Notice:

This is an ancillary guide to the official STEP Guide created to reduce the length of that guide. Most of the following is general modding information or information for those not interested in using Mod organizer (MO) as STEP recommends.

Suggested first reading: The installation section below!

Installation and configuration

STEP recommends installing Skyrim to an SSD, if available, and preferably on a separate drive/partition than the Operating System is installed on (i.e. instead of installing to the C: drive, install it to D:, E:, etc). If a separate drive/partition is unavailable, avoid installing Steam and Skyrim in "C:\Program Files" or "C:\Program Files (x86)" folders since Windows User Account Control [UAC] will cause issues with a modded Skyrim.

Skyrim is installed through Steam, and this can be done on one of two ways:

1. Purchase the physical Skyrim DVD from a retailer - Run "rushbrookrathbone.co.uk," and follow the on-screen instructions to install Steam and Skyrim (see second video link above).
2. Install Steam and purchase the digital media from the Steam store - Navigate to the Steam website, download the installer, and launch "rushbrookrathbone.co.uk" (see first video link above). Once Steam is installed, use the Steam search bar to search for "Skyrim" to purchase and install the game (see second video link above).

&#;&#;&#;&#;&#;&#;Notice:

If Steam/Skyrim are installed according to these instructions and Mod Organizer (MO) is used according to recommendations in the STEP Guide, then backup procedures and security changes are optional and not necessary. Nevertheless, these procedures are mentioned in the video guides above.

Security settings

Since User Account Control can prevent some tools from working correctly, it is recommended to edit the security settings of the Skyrim directory to allow full control:

1. Navigate to .
2. Right-click the Skyrim folder and select Properties.
3. Go to the Security tab and click Edit
4. Highlight Users () in the top panel.
5. In the bottom panel, under the Allow column for Full Control, tick the checkbox and click Apply.
6. Click OK and OK again.

Backup

Before anything else is done, it is good practice to create a "Vanilla backup" of this baseline installation. Steam's backup tool is not the most efficient way to backup the clean Skyrim installation. Instead, use 7-Zip or other compression software to compress the following directories, which may be quickly extracted to the same or analogous locations in the event that a fresh installation is desired:

Reverting to the Vanilla Baseline

MO Users:

If using Mod Organizer (MO) according to the recommendations in the STEP Guide, there is nothing gained by following this procedure, as MO inherently preserves a pristine vanilla Skyrim game directory, since it uses a virtualization technique.

During the modding experience it is handy to know how to re-establish a clean Skyrim installation to avoid having to use Steam to un-install and re-install from scratch, as this is very inefficient and takes an unnecessarily long time. If an archived backup was not created (see previous section) there is still a much simpler way to achieve the same effect without waiting for Steam. This process is discussed in Reverting Skyrim to a Pristine (Vanilla) Installation.

Configuration

MO Users:

Mod Organizer uses profiles, which store the user configuration under . This 'protects' the config files by isolating them under each unique profile and serves to back up profile-specific INI and other configuration files. These are the INI files that are actually edited from within MO > Tools, and the default configuration files still exist in their original locations for reference when Skyrim is launched from outside MO

The Skyrim configuration files (INIs) are stored under . Modifying these files can greatly improve the Skyrim experience and represents an important section of the STEP guide. holds all of Skyrim's savegame files. A more advanced tutorial on INI settings for both AMD and Nvidia users can be found in the Elder Scrolls V: Skyrim Tweak Guide.

Additional Skyrim-profile resources are located in and include "rushbrookrathbone.co.uk", "rushbrookrathbone.co.uk", and "rushbrookrathbone.co.uk" as well as "rushbrookrathbone.co.uk" if using a mod manager. These files keep track of all mod plugins (i.e. ESPs), whether they are active or not and the order they are to be loaded in when Skyrim is launched.

Mods

&#;&#;&#;&#;&#;&#;Notice:

The following instructions pertain to general mod handling when NOT using Mod Organizer (MO) as the primary mod management tool.

Installation

Skyrim mods must all be installed to the Skyrim data directory. If you have followed recommendations it will be somewhere like this . All .bsa and plugin files (.esp and .esm) reside here. Directories corresponding to each .bsa name can be created and files inside them will override files inside of the .bsa, so any texture files in will overwrite textures of the same name in rushbrookrathbone.co.uk for example. Always save your game before installing a mod, you will need to revert to it if you want to uninstall the mod at a later date. Quote from Skyrim Best Practices on BethBlog

"When you play Skyrim with a mod, in most cases, the new data for the mod will be written into any new saved games you create. For example, if you play Skyrim with Mod X and create a save, the next time you load that save, the game will expect Mod X to also be loaded. If you no longer want to play Skyrim with Mod X, it is best to unload Mod X (by unchecking the plugin under Data Files in your Skyrim launcher) and loading a save that does not require Mod X, usually an older save or a backed up save."

Uninstallation

First disable a mod in the launcher (if it has an esp) and then delete all files associated with the mod. Fairly easy to uninstall mods that include just a bsa and/or esp just delete them, mods that contain media or graphics are hard to keep track of manually and can be very difficult to uninstall without the aid of a mod manager. Now, load the savegame you made before installing the mod.

If many mods have been installed it is often easier to delete the Skyrim directory and restore from your vanilla backup. If you have no vanilla backup just delete all the non *.bsa files and directories from Skyrim/data and then run verify integrity from Steam. This will download any corrupt or missing files and reinstall them for you although there is no guarantee that you removed all the offending files.

Savegame compatibility

Note that optimally mods should only be installed before you start playing Skyrim and not removed or upgraded until you have completed the game. Savegames will become corrupt if mods are removed or updated, this corruption will build up over time and can be viewed/logged by running Skyrim with debugging turned on. There are several methods of creating savegames that mitigate the danger but none to remove it. To make a more reliable (but not clean) savegame, go inside an unoccupied house, open the console (type ~) and type pcb and enter, exit the console (~), and save from the menu (not a quicksave).

The Troubleshooting Guide includes a comprehensive method for Installing and Uninstalling mods while mitigating the danger of creating corrupted savegames. This is a lot of work for a little benefit so its best to do very few large upgrades instead of many small ones.

Backup

After completing a full installation of STEP is a perfect time to create a fully configured and modded backup of your installation: It is not recommended to use Steam to backup Skyrim as it will often fail to properly restore as well as often autoupdating to the latest version of skyrim. Use 7zip or other archiver and compress the Skyrim directory and save to a storage disk (not your ssd). Additionally, you should use 7zip and save into .

Mod file types and directories

File types

BSA stands for Bethesda Softworks Archive, this is a custom archive format (like a ZIP file) that contains other files and directories. Skyrim BSA files are different from previous versions and require new tools in order to pack and unpack them without introducing corruption, BSAopt works very well. The default Skyrim BSA's are: Animations, Interface, Meshes, Misc, Shaders, Sounds, Textures, Voices, VoicesExtra, and Update. DLC's and mods made with the official creation kit also often include BSA's, these files will override the default bsa's.

ESM and ESP are mod files and are acronyms for Elder Scrolls Master and Plugin. Tthey are used to directly modify the Skyrim world and gameplay. ESMs are master files and are used to create completely new areas of the world or other things within these areas. ESP files are always dependent on an ESM (usually rushbrookrathbone.co.uk) and modify items, creatures, or places already present.

INI files contain configuration data and the ones in your Skyrim directory are simply the defaults used to rebuild missing or corrupted files into .

Directories

There are several special directories in . These directories may not be created by default; however, when they are, they function in a special way. These include: Grass, Interface, Lodsettings, Meshes, Music, Scripts, Shadersfx, Sound, Strings, and Textures. Correctly named and formatted files placed in these directories (termed "Loose files") will override files inside the default Skyrim BSA's as well as DLC's and other mods distributed with bsa's.

A Docs directory is useful for storing all documentation, if you are using Wrye Bash to install it will automatically rename all readme's to "modname" rushbrookrathbone.co.uk and place them there. Additional directories named SKSE and ASI hold Script Extender plugins and Script Dragon Plugins respectively.