Download driver notebook toshiba nb305 full version

Change Points

1. Fixed: Horizontal lines appear on the top edge of display while starting Windows 7.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click OK, Unzip then OK again.
5. Click Yes to continue if a User Account Control Window is displayed.
6. Answer the remaining prompts to complete the installation.
7. Restart the computer.

Version Verification

1. Run Device Manager
2. Double-click Display adapters.
3. Double-click Intel(R) Graphic Media Accelerator .
4. Click the Driver tab.
5. Verify that the Driver Version is V.

Change History

Version -
• Initial production BIOS for these models.

Change History

Version -
• Fixed: Fail message in the USB Sleep and Charge Function.
• Fixed: Event Log error (HAL).
• Added a check to prevent BIOS updates when power is lost.
• Added a dynabook logo switch function.
• Added a workaround for the Atheros HB
• Modified the GPIO's default setting to Mode 3.
• Modified the USB_CHG_EN# low pulse timing.
Version -
• Initial production BIOS for these models.

Change History

Version -
• Added: Computrace support for Toshiba Canada (TCL) models.
• Modified the GHz CPU speed string.
Version -
• Fixed: Fail message in the USB Sleep and Charge Function.
• Fixed: Event Log error (HAL).
• Added a check to prevent BIOS updates when power is lost.
• Added a dynabook logo switch function.
• Added a workaround for the Atheros HB
• Modified the GPIO's default setting to Mode 3.
• Modified the USB_CHG_EN# low pulse timing.
Version -
• Initial production BIOS for these models.

Release Notes

• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key to load setup defaults.
• Press the F10 function key to save settings and exit. The computer will automatically reboot.

Change History

Version -
• Modified a French string in the BIOS Setup menu.
• Fixed: USB drive is undetectable after flashing the BIOS.
• EC Fixed: The lower limit value of the remaining battery life is not correct after recovery.
• Note: BIOS V and higher support DDR2 and DDR3 memory. Previous versions only support DDR2 memory.
Version -
• Updated the MRC from to
Version -
• Added: Computrace support for Toshiba Canada (TCL) models.
• Modified the GHz CPU speed string.
Version -
• Fixed: Fail message in the USB Sleep and Charge Function.
• Fixed: Event Log error (HAL).
• Added a check to prevent BIOS updates when power is lost.
• Added a dynabook logo switch function.
• Added a workaround for the Atheros HB
• Modified the GPIO's default setting to Mode 3.
• Modified the USB_CHG_EN# low pulse timing.
Version -
• Initial production BIOS for these models.

Release Notes

• ** BIOS V or above can be used for DDR3 models.
• ** BIOS V to V is for DDR2 models, and can not be used for DDR3 models.
• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key to load setup defaults.
• Press the F10 function key to save settings and exit. The computer will automatically reboot.

Change History

Version -
• Fixed: Can not boot from USB Drive/ODD when connected to a specific USB port.
• Fixed: The Owner String issue.
• Added support

Change points from the last released version ():

1. Fixed: Toshiba Service Station crashes causing the "Service Station has stopped working" error message.
2. Added Chinese translations.
3. Added code to downsize the TSS window when it is too large to fit in the display.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
   1. If a User Account Control message is displayed, click Continue.
   2. Answer the displayed prompts to complete the installation.
   3. Restart the computer.

Change Points

1. Changes were made to improve the TOSHIBA Media Controller Digital Media Renderer (DMR) function. Version has more logic for detecting correct/reasonable content for North American Toshiba REGZA TVs purchased in , and later.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click Start at the TOSHIBA Archive Extractor window.
5. Click Yes if a User Account Control window is displayed.
6. Click Continue to start the installer program.
7. Click Next to start the installation, and Next again to finish.

Version Verification

1. Open Control Panel, Programs and Features, then click Uninstall a program.
2. Scroll down to TOSHIBA Media Controller.
3. Verify that the version is .

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click Start at the TOSHIBA Archive Extractor window.
5. Click Yes if a User Account Control window is displayed.
6. The program will complete quickly.
7. Restart the computer.
8. Toshiba Utilities will work normally again.

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Service Station Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file rushbrookrathbone.co.uk to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Toshiba Service Station is applied successfully, the message below will be shown.

This is a Bluetooth Stack for Windows by Toshiba update

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Bluetooth Stack Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file rushbrookrathbone.co.uk to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Bluetooth Stack for Windows by Toshiba v(T) is applied successfully, the message below will be shown. Click Yes to restart the system.

LAPTOP CHECKUP

Laptop Checkup will check for:

• Issues that may be slowing down your laptop.
• Data, photos and music files that need backup.
• Viruses, spyware, malware and other threats.

To open Laptop Checkup:

1. Click the Start menu.
2. Enter "Laptop" into the search field.
3. Click "Toshiba Laptop Checkup" in the search results.
4. If this utility has not been used, it will automatically launch and install.
   
5. Laptop Checkup will open allowing you to perform maintenance functions on your laptop to keep it running at peak performance.
   

CONFIGFREE

ConfigFree® is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.

To access ConfigFree go to START > ALL PROGRAMS > TOSHIBA > NETWORK & CONNECTIVITY > CONFIG FREE.

ConfigFree allows you to perform the following:

• Use Connectivity Doctor to quickly fix any network connection problems.
• Create ConfigFree profiles for automatic switching between preset network settings and devices, even if there is a change in the network environment.
• Automatic switching between several wireless LAN environments.
• Automatic switching to a wireless LAN if the cable is disconnected when using both a wired and wireless LAN.
• You can also easily switch LAN environments manually.

You may have to add the ConfigFree gadget to your computer to allow you to use ConfigFree features.

To add the ConfigFree gadget:

1. Click the Start menu.
2. Enter "Configfree" into the search field.
3. Click "Add ConfigFree Gadgets" in the search results.
4. The Add ConfigFree Gadgets window will open.
   
5. Add the desired gadget and click "Add".
6. If Add Windows Sidebar Gadget is selected, the gadget will display on your desktop.
   
7. The dots on the gadget are available connection points. If you are connected to one, a line will conne

APP PLACE

Because our apps are cloud based, you don’t need to download them to your computer. Instead you access them through the Internet. They save your valuable hard drive space; you always have the latest, most up-to-date software version. Your apps are virtually always available to you, anytime, from anywhere.

To make it easier, we’ve grouped our apps onto four main packages specially designed to work for you and your Toshiba laptop.

• Road Warrior - All your things with you wherever you are.
• Family CEO - Your household organized, Your memories kept.
• The Essentials - The essential apps that make any device complete.
• Student life - Balancing your busy student life. 

To open TOSHIBA App Place:

Click on the Blue App Place icon in the task bar (if present).

OR

1. Click the Start menu.
2. Enter "App" into the search field.
3. Click "Toshiba App Place" in the search results.
4. Toshiba App Place web page will open. Sign in using your existing account or create a new account in the upper Right corner.
   
5. To learn more about Toshiba App Place, CLICK HERE.

***NOTE*** This software package is part of the pre-installed software for the applicable products.

Change points:

1. Fixed: System crashes after login.
2. Improved package downloads by using the Binary Intelligent Transfer Service (BITS).
3. Combined the Download and Install buttons.
4. Added a Home Link to the Settings Page.
5. Removed the Notification Level Setting.
6. Deletes obsolete software - i.e. Software that was already downloaded and installed.
7. Notification message improvements.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Answer the displayed prompts to complete the installation.

TOSHIBA VALUE ADDED PACKAGE

The Toshiba Value Added Package (TVAP) provides an essential link to system resources required by several TOSHIBA original program components for access to BIOS functions etc, such as:

• TOSHIBA eco Utility provides extended power control options to our customers over devices in Toshiba notebooks. Reduction in power consumption by switching to optimum power settings based on plugged-in or on battery power machine status, or remaining battery power percentage.
• TOSHIBA HWSetup lets you customize your hardware settings according to the way that you work with your computer and the peripherals you use.
• TOSHIBA Password Utility lets you set and maintain password security that restricts access to the computer.
• TOSHIBA Flash Cards provides additional Hotkey (Function Fn keys) functionality to Toshiba notebooks and includes an intelligent user interface (UI) in the form of a graphical drop-down invoked by hotkey operation. This improves the user experience by allowing them to visually identify current status and available options at time of selection, saving them time spent blindly moving between the hot-key options to find the one they need.
• TOSHIBA PC Diagnostic Tool can display the basic information of a computer and diagnose simple issues using Windows built-in toolset.

TVAP should be installed before other Toshiba Utility files to ensure their proper functioning.

If TVAP is not installed on your computer, you can verify if it is available for your specific model under "Downloads" on the TOSHIBA support web site (rushbrookrathbone.co.uk).